Changing The Pause After The Recall Key; Switching Temporarily To Touch Tone Dialling (Dtmf) - Siemens Gigaset S680 Instruction Manual

Connecting the base station to PABX
Changing the pause after the
recall key
You can change the length of the pause if
your PABX requires this (refer to the user
guide for your PABX).
Open menu.
v
N 5 O
Press keys.
Enter a digit for the length of
~
the pause (1 = 800 ms;
2 = 1600 ms; 3 = 3200 ms)
and press
Changing a dialling pause (pause after
access code)
Precondition: You have saved an access
code (page 59).
Open menu.
v
N 5 O
Press keys.
Enter a digit for the length of
~
the pause (1 = 1 sec.;
2 = 2 sec.; 3 = 3 sec.;
4 = 6 sec.) and press
To insert a dialling pause: press S for
2 seconds. A P appears in the display.
60
2
§OK§
.
§OK§
.
Switching temporarily to touch
tone dialling (DTMF)
If your PABX still operates with pulse dial-
ling (DP), but you need touch tone dialling
(DTMF) for a connection (e.g. to listen to
the network mailbox) you must switch to
touch tone dialling for the call.
Precondition: You are conducting a call or
have already dialled an external number.
Press the star key.
*
After the call is ended, pulse dialling is
automatically activated again.