Resetting the system PIN
If you have forgotten your system PIN you
can reset the base station to the original
code 0000:
Disconnect the power cord from the base
station. Hold down the registration/pag-
ing key on the base station while recon-
necting the power cable to the base sta-
tion. Release the key after a while.
The base has now been reset and the sys-
tem PIN 0000 set.
Please note:
All handsets are deregistered and must be re-
registered.
Activating/deactivating
music on hold
¢
¢
¢
v
Ð
Base
Press
to activate or deactivate music
§OK§
‰
on hold (
= on).
Repeater support
With a repeater you can increase the
range and reception strength of your base
station. You will need to activate repeater
mode. This will terminate any calls that
are in progress at the time.
Precondition: A repeater is registered.
Eco mode is disabled.
¢
¢
¢
v
Ð
Base
¢
Repeater Mode
Press the display key.
§Yes§
When repeater mode is active, the menu
item is marked with
Please note:
Repeater support and eco mode (see page 12)
cancel each other out, i.e. both functions can-
not be used at the same time.
Music on hold
Add. Features
‰
.
Restoring the base station to the
factory settings
When the settings are restored
u
eco mode is disabled,
u
handsets are still registered,
u
the system PIN is not reset,
u
the SMS info services are not reset.
¢
¢
¢
v
Ð
Base
~
Enter the system PIN and press
.
§OK§
Press the display key.
§Yes§
Cancel the restoring process by pressing
a or the display key
a
Press and hold (idle status)
Setting the base station
Base Reset
.
§No§
41