Specifications - Siemens Gigaset S680 Instruction Manual

Appendix

Specifications

Recommended batteries
Technology:
Nickel-metal-hydride (NiMH)
Size: AAA (Micro, HR03)
Voltage: 1.2 V
Capacity: 600 – 1200 mAh
We recommend the following battery
types, because these are the only ones
that guarantee the specified operating
times, full functionality and long service
life:
u
Sanyo NiMH 800
u
GP 850 mAh
u
Yuasa Technologies AAA 800
The device is supplied with two recom-
mended batteries.
Handset operating times/charging
times
The operating time of your Gigaset
depends on the age of the batteries and
the way they are used. (All times are max-
imum possible times and apply only when
the display backlight is deactivated.)
Capacity (mAh) approx.
600
Standby time 130
(hours)
Talktime
(hours)
Operating time for 70
1.5 hour call each
day (hours)
Charging time,
charging cradle
(hours)
Charging time,
base station
(hours)
64
800 1000 1200
180 220 265
7 10 12 14
90 115 135
6 9 11 13
5 7 8 10
At the time of going to print, batteries up
to 900 mAh were available and had been
tested in the system. Due to the constant
progression in battery development, the
list of recommended batteries in the FAQ
section of the Gigaset Customer Care
pages is regularly updated:
www.gigaset.com/customercare
Base station power consumption
In standby mode: Gigaset S680: approx.
1.2 watt Gigaset S685: approx. 1.6 watt
During a call: Gigaset S680: approx. 1
watt Gigaset S685: approx. 1.5 watt
General specifications
DECT standard is supported
GAP standard is supported
No. of channels 60 duplex channels
Radio frequency
range 1880–1900 MHz
Duplex method Time multiplex,
10 ms frame length
Channel grid 1728 kHz
Bit rate 1152 kbit/s
Modulation GFSK
Language code 32 kbit/s
Transmission 10 mW, average power per
power channel
Range up to 300 m outdoors,
up to 50 m indoors
Base station
power supply 230 V ~/50 Hz
Environmental +5 °C to +45 °C;
conditions in
20% to 75% humidity
operation
Dialling mode DTMF (touch tone dialling)/
DP (pulse dialling)