Sms (Text Messages); Writing/Sending An Sms - Siemens Gigaset S680 Instruction Manual

SMS (text messages)

Your unit is supplied ready for sending
SMS messages immediately.
Preconditions:
u
Calling Line Identification is enabled for
your phone line.
u
Your network provider supports SMS in
the fixed network (information on this
can be obtained from your network
provider).
u
You are registered with your service
provider to send and receive SMS.
SMS messages are exchanged between
SMS centres operated by service provid-
ers. You must enter the SMS centre
through which you wish to send and
receive SMS messages into your phone.
You can receive SMS messages from every
SMS centre that is entered, provided you
have registered with your service provider.
Your SMS messages are sent through the
SMS centre that is entered as the active
send service centre (page 34). Only one
SMS centre can be the active send service
centre at any one time.
If no SMS Service Centre is entered, the
SMS menu only contains the entry
Settings. Enter an SMS Service Centre
(page 34).
Information on writing an SMS can be
found in the appendix:
u
For how to enter text, see page 66.
u
Writing using the predictive text tool
EATONI, see page 66.
Rules
u
An SMS can be up to 612 characters.
u
If there are more than 160 characters,
the SMS is sent as a linked SMS (up to
4 SMS messages with 153 characters
each).
Please note:
u
If your phone is connected to a PABX,
please read page 34.
u
To receive SMS messages you must be
registered with your service provider.

Writing/sending an SMS

Writing an SMS
¢
v î
Mailbox 2 Select mailbox if necessary
and press
Enter mailbox PIN if necessary
~
and press
New SMS Select and press
Write an SMS.
~
Please note:
– Instructions on entering text can be found
at page 66 and on writing with EATONI pre-
dictive text at page 66.
– EATONI is activated as a default setting.
Activating/deactivating EATONI see
page 67.
Sending an SMS
Press the talk key
c
Or:
§Options§
Press the display key.
Select and press
Send
Select and press
SMS
s / C
/
~
Select number with area code
(even if you are in that area)
from the directory or call-by-
call list, or enter number
directly. For SMS to an SMS
mailbox: add the mailbox ID to
the end of the number.
§Send§
Press the display key. The SMS
is sent.
SMS (text messages)
§OK§
.
§OK§
.
§OK§
.
§OK§
.
§OK§
.
29