Deregistering Handsets; Locating A Handset ("Paging"); Changing The Base Station; Making Internal Calls - Siemens Gigaset S680 Instruction Manual

Using several handsets

Deregistering handsets

You can deregister any other registered
handset from any registered Gigaset S68H
handset.
Open list of internal parties.
u
The handset you are currently
using is indicated by < .
Select the internal party you
s
wish to deregister.
§Options§
Open menu.
De-reg. H/Set No.
Select and press
Enter the current system PIN
~
and press
§Yes§
Press the display key.

Locating a handset ("paging")

You can locate your handset using the
base station.
¤
Briefly press the registration/paging
key on the base station (page 2).
¤
All handsets will ring simultaneously
("paging"), even if the ring tones are
switched off.
Ending paging
¤
Briefly press the registration/paging
key on the base station or press the talk
key c on the handset.

Changing the base station

If your handset is registered to more than
one base station, you can set it to a partic-
ular base station or to the base station
that has the best reception
¢ ¢
Handset
v
Select one of the registered
s
base stations or
§OK§
press
44
§OK§
.
§OK§
.
(Best Base).
¢
Select Base
Best Base and
.

Making internal calls

Internal calls to other handsets registered
on the same base station are free.
Calling a specific handset
Initiate internal call.
u
Enter the number of the hand-
~
set.
Or:
Initiate internal call.
u
Select handset.
s
Press the talk key.
c
Calling all handsets ("group call")
Initiate internal call.
u
Press the star key. All handsets
*
are called.
Ending a call
Press the end call key.
a
Transferring a call to another handset
You can transfer an external call to
another handset (connect).
Open list of handsets.
u
The external participant hears
hold music if activated (see
page 57).
Select a handset or
s
§OK§
press
When the internal participant answers:
¤
If necessary announce the external call.
Press the end call key.
a
The external call is transferred to the other
handset.
If the internal participant does not answer
or the line is busy, press the display key
§End§
, to return to the external call.
When transferring a call you can also press
the end call key a before the internal
participant answers.
and
Call All
.