Changing Ringer Tones; Repeater Support; Restoring The Base Station To The Factory Settings - Siemens Gigaset C380 User Manual

Base station settings

Changing ringer tones

u
Volume:
You can choose between five volumes
and the "crescendo" ring,
Select "0" to deactivate the base station
ringer.
u
Ringer tones:
You can set a ringer melody for external
¢
calls, page 45.
¢ ¢
Settings
§Menu§
¢
/
Ringer Volume Ringer Melody
For how to adjust the settings,
¢
page 45.

Repeater support

With a repeater you can increase the range
and reception strength of your base sta-
tion. You will need to activate repeater
mode. This will terminate any calls that
are in progress at the time.
Precondition: A repeater is registered.
The Eco Mode / Eco Mode+ mode is deac-
tivated.
¢ ¢
Settings
§Menu§
¢
Additional Features
Press the display key.
§Yes§
When repeater mode is active, the menu
item is marked with
Please note
Repeater support and Eco Mode / Eco
¢
Mode+ ( page 41) cancel each
other out, i.e. both functions cannot
be used at the same time.
48
¢
page 45.
¢
Base Audio Settings
Base
¢
Repeater Mode
‰
.
Restoring the base station to the
factory settings
When restoring factory settings:
u
Handsets are de-registered
– When resetting via the menu:
all Gigaset handsets
– When resetting using the key on
the base station: also all handsets
of other GAP capable devices
u
Individual settings are reset
u
All lists are deleted
u
The system PIN is reset to the original
code 0000
u
Eco Mode+ is deactivated
Only the date and time are retained.
Resetting the base station via the
menu
¢ ¢
Settings
§Menu§
Press the display key to
§OK§
confirm.
Resetting the base station using a key
on the base station
¤
Disconnect the power cord from the
base station.
¤
Hold down the registration/paging key
¢
( page 2) on the base station while
reconnecting the power cable to the
base station. Press and hold the key
until you hear a confirmation tone.
The base station has now been reset.
¢
Base Base Reset