Status Codes On Inverters With Several Power Stage Sets - Fronius IG Plus A 3.0-1 UNI Operating Instructions Manual

Status Codes on A special status diagnostic is run if an error occurs in an inverter with several power stage
inverters with sets.
Several Power
Stage Sets It is also possible to call up status codes even if there is no actual error in existence. This
form of status polling may be found in the section "The Setup Menu."
116
Display during normal operation
When there is an error in one of the power
stage sets, the display flashes between
"STATE" and the corresponding status
code
(e.g., "STATE 515")
and
"ENTER"
- Press the "Enter" key twice
- The status display of the power stage
sets "STATE PS" appears
- Press the "Enter" key