Table of Contents
Advertisement
Menu Items in the Setup Menu
STANDBY
Unit
Setting range
Factory setting
-
-
-
-
-
If the Standby mode is activated by pressing the "Enter" key, the display alternates be-
tween "STANDBY" and "Enter:"
To maintain Standby operation:
-
To end Standby operation:
-
CONTRAST
Unit
Setting range
Factory setting
Since contrast depends on temperature, it may be necessary to adjust the "CONTRAST"
menu item when ambient conditions change.
-
Enter
Automatic operation of feeding energy into the grid (Standby
deactivated)
The power electronics are switched off in standby mode. No power is fed into the grid.
The Operating Status LED flashes orange.
The orange flashing Operating Status LED stops at dusk.
After the subsequent sunrise, the power supply operation into the grid is resumed au-
tomatically (after completion of the startup phase the LED is illuminated green).
Grid supply operation can be resumed at any time whenever the LED is flashing or-
ange (deactivate "STANDBY").
Press the "Esc" key
Press the "Enter" key
-
0 - 7
7
Manual activation / deactivation of Standby
operation using the "Enter" key
Contrast setting on LCD display
101
Advertisement
Table of Contents
