Table of Contents
Advertisement
DAT COM
Setting range
OK COM / ERROR COM
Displays data communication available via Solar Net or an error that occurred in data com-
munication
PDCD RST
Resets the Fronius Personal Display Card option
IFCD RST
Resets the Fronius Interface Card option
AFD
Unit
Setting range
Factory Setting
SELF / TEST* AFD
Self-test to verify that the inverter stops feeding power into the grid in the event of a detect-
ed arc.
*
Test Procedure:
1
2
3
4
The self-test is started. The Fronius Arc Blocker plug-in card simulates an arc and returns
the corresponding signal to the inverter.
With the successful test, the inverter disconnects from the grid and stops feeding power
into the grid.
The display shows 'PASS'.
5
104
Displays OK COM or ERROR COM;
PDCD RST / IFCD RST
-
SELF/TEST* AFD
-
alternating display
Select the menu item 'AFD' in the setup menu
Press the 'Enter' key
Select the setting option 'SELF TEST / AFD' using the 'Up' or 'Down' key
Press the 'Enter' key
Confirm the display 'PASS' by pressing the 'Enter' key
Indicates status of data transmission, re-
sets the Personal Display Card and Interfa-
ce Card
Self-test of the AFD function
Advertisement
Table of Contents
