RT 75
13.
Lift the frame, handle bar and tine shield off as one
unit. See Figure 5.9.
14.
Remove the tines:
14a. Remove the bow tie clip and clevis pin.
See Figure 5.10.
14b. Slide the tines off of the shaft.
NOTE: Any time the tines are removed, or once a
year, the tine shafts should be coated with
anti-seize or grease.
NOTE: When installing the tines, make sure the
curve of the tine is facing the direction of
rotation. See Figure 5.11.
24
Figure 5.9
Bow tie clip
Figure 5.10
Direction of rotation
Front of tiller
Figure 5.11
Curve of the tine