Forward Drive Cable - Cub Cadet RT 75 Shop Manual

RT 75

Forward drive cable

To remove/replace the forward drive cable:
1. Disconnect and ground the spark plug wire.
2. Disconnect the black cable fitting from the handle bar
bracket. See Figure 3.3.
NOTE: A ford fuel line tool is useful to compress the
ears on the cable fitting while removing it.
See Figure 3.4.
3. Unhook the Z-fitting from the forward drive bail.
4. Remove the two screws that secure the belt cover.
See Figure 3.5.
5. Swing the belt cover up and off of the tiller.
12
Disconnect the
cable fitting
Figure 3.3
Ford fuel
line tool
Figure 3.4
Remove these
screws
washer
Figure 3.5