Download Print this page
Cub Cadet RT 45 Operator's Manual

Cub Cadet RT 45 Operator's Manual

Rear tine tiller
Hide thumbs Also See for RT 45:

Advertisement

Available languages

Available languages

Quick Links

Safe Operation Practices • Assembly & Set-Up • Controls & Operation • Service • Troubleshooting • Replacement Parts • Warranty
Record Product Information
Before setting up and operating your new equipment, please locate the model
plate and record the information in the area provided to the right. The model plate
contains the unit's model and serial numbers. This information will be necessary,
should you seek technical support via our web site, Customer Support Department,
or with a local authorized service dealer.
Table of Contents
Safe Operation Practices .......................................................... 3
Assembly & Set-Up ................................................................... 5
Controls & Operation ............................................................... 7
Service .................................................................................. 10
Read and follow all safety rules and instructions in this manual before attempting to operate this machine. Failure to comply with these instructions
may result in personal injury.
Engine Exhaust, some of its constituents, and certain vehicle components contain or emit chemicals known to the State of California to cause cancer and
birth defects.
NOTE: This Operator's Manual covers several models. Features may vary by model. Not all features in this manual are applicable to all models and the model depicted may differ
from yours.
O
peratOr
Rear Tine Tiller - Model RT 45
California Proposition 65
'
M
s
anual
M
N
odel
uMber
S
N
erial
uMber
Troubleshooting .....................................................................12
Replacement Parts .................................................................13
Warranty ...............................................................................14
Español ................................................................................. 16
WARNING
WARNING
Form No. 769-12653A
(December 9, 2019)

Advertisement

loading
Need help?

Need help?

Do you have a question about the RT 45 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Cub Cadet RT 45

  • Page 1 Safe Operation Practices • Assembly & Set-Up • Controls & Operation • Service • Troubleshooting • Replacement Parts • Warranty ’ peratOr anual Rear Tine Tiller - Model RT 45 Record Product Information odel uMber Before setting up and operating your new equipment, please locate the model plate and record the information in the area provided to the right.
  • Page 2 If you have difficulty assembling this product or have any questions regarding the controls, operation, or maintenance of this machine, you can seek help from the experts. Choose from the options below: ◊ Visit us on the web at www.cubcadet.com ◊ Locate your nearest Cub Cadet Dealer at (877) 282-8684 ◊ Write to Cub Cadet LLC • P.O. Box 361131 • Cleveland, OH • 44136-0019...
  • Page 3 SAFE OPERATION PRACTICES WARNING This symbol points out important safety instructions which, if not followed, could endanger the personal safety and/or property of yourself and others. Read and follow all instructions in this manual before attempting to operate this machine. Failure to comply with these instructions may result in personal injury. When you see this symbol - HEED ITS WARNING! DANGER This machine was built to be operated according to the safe operation practices in this manual.
  • Page 4 SAFE OPERATION PRACTICES Notice Regarding Emissions Engines which are certified to comply with California and federal EPA emission regulations for SORE (Small Off Road Equipment) are certified to operate on regular unleaded gasoline, and may include the following emission control systems: Engine Modification (EM), Oxidizing Catalyst (OC), Secondary Air Injection (SAI) and Three Way Catalyst (TWC) if so equipped.
  • Page 5 Remove all parts from the carton. Check that you have the items listed in the assembly cable mount as Contents of Carton list (contact your local dealer or the Cub Cadet technical seen here. The red clip service representative if items are missing or damaged).
  • Page 6 ASSEMBLY & SET-UP Set-Up Slide the emergency stop control switch wire through the opening on the bottom right side Tire Pressure of the handle panel, where clutch Check the air pressure with a tire gauge. Deflate or inflate the tires equally to cables were previously routed.
  • Page 7 CONTROLS & OPERATION Wheel Drive Pins Each wheel is equipped with a wheel drive click pin that secures Reverse Handle the wheel to the wheel shaft. The wheels can be positioned in Emergency Stop either a WHEEL DRIVE or a FREEWHEEL mode. Control (If Equipped) Emergency Stop Control (IF EQUIPPED) Forward Clutch Bail...
  • Page 8 CONTROLS & OPERATION Check engine oil level. See Engine Operator’s Manual. Let the tiller move at its own pace and do not push down on the handlebars to try and force the tines to dig deeper — this takes weight off Check that all safety guards and covers are in place.
  • Page 9 CONTROLS & OPERATION Adjusting the Handle Height Clearing the Tines • The tines have a self-clearing action which eliminates most of the tangling The handle should be adjusted of debris. However, occasionally dry grass, stringy stalks or tough vines may so that when the tiller is digging become tangled.
  • Page 10 SERVICE Lubrication WARNING After every 10 operating hours, Before inspecting, cleaning or servicing the machine, shut off the engine, oil or grease the lubrication wait for all moving parts to come to a complete stop, wait for the engine Depth Regulator Lever points shown in Figure 16 and to cool, disconnect the spark plug wire and move the wire away from described below.
  • Page 11 SERVICE Never store the tiller with fuel in the fuel tank in an enclosed area where Remove the flange nut Remove V-side out pulley with gas fumes could reach an open flame or spark, or where ignition sources are securing the transmission Flange Nut belts present (space heaters, hot water heaters, furnaces, etc.).
  • Page 12 TROUBLESHOOTING Problem Cause Remedy Wheels/Tines will not turn 1. Improper use of controls. 1. Review Controls & Operation section. 2. Worn, broken or misadjusted drive belt(s). 2. Replace or adjust belts. 3. Internal transmission wear or damage. 3. Contact authorized service dealer. 4.
  • Page 13 Click Pin, .25 x 1.56 Cub Cadet Genuine Parts can be ordered through your local authorized Cub Cadet dealer, online at cubcadet.com or by phone at 1-800-965-4Cub. To locate your nearest authorized Cub Cadet dealer, visit cubcadet.com or call 1-877-282-8684.
  • Page 14 CUB CADET LLC -- LIMITED WARRANTY The limited warranty set forth herein is given by Cub Cadet LLC with respect to a new Cub Cadet® product (hereinafter “Product”) purchased and used in the United States and/or Canada to the Initial Purchaser (as defined herein). This limited warranty does not cover Emission Control Systems and is not a Federal Emission Control Warranty Statement, as defined by U.S.
  • Page 15 Website at www.cubcadet.ca. This limited product warranty is provided INCLUDING A DEALER OR RETAILER, WITH RESPECT TO ANY, by Cub Cadet LLC and is the only product warranty provided by Cub Cadet LLC PRODUCT SHALL BIND CUB CADET LLC. DURING THE WARRANTY for the Product.
  • Page 16: Table Of Contents

    Medidas de seguridad • Montaje y Configuración • Controles y Funcionamiento • Servicio • Solución de problemas • Garantía anual del peradOr Cultivadora de dientes traseros — Modelo RT 45 Registro de información de producto úMerO de MOdelO Antes de instalar y hacer funcionar su equipo nuevo, por favor localice la placa de modelo en el equipo y registre la información en el espacio de la derecha.
  • Page 17 Cub Cadet local autorizado o póngase en contacto directamente con nosotros. En esta página y en todo momento las medidas de seguridad recomendadas. De lo contrario, se podrían encontrará...
  • Page 18: Medidas De Seguridad

    MEDIDAS DE SEGURIDAD ADVERTENCIA Este símbolo indica instrucciones de seguridad importantes que, de no cumplirse, pueden poner en peligro su seguridad personal y/o material y la de otras personas. Lea y cumpla todas las instrucciones de este manual antes de intentar hacer funcionar esta máquina. Si no cumple estas instrucciones puede provocar lesiones personales. Cuando vea este símbolo - TENGA EN CUENTA LA ADVERTENCIA.
  • Page 19 MEDIDAS DE SEGURIDAD Amortiguador de Chispas Cumpla con las normas y reglamentaciones sobre la manera de eliminar gasolina, aceite, etc. para proteger el medio ambiente. Según la Comisión de Seguridad de Productos para el Consumidor de los EE.UU. (CPSC) y la Agencia de ADVERTENCIA Protección Ambiental de los EE.UU.
  • Page 20: Montaje Y Configuración

    MONTAJE Y CONFIGURACIÓN Contenido de la caja Conexión de los cables • Cultivadora A fin de conectar los cables, siga estos pasos: • Conjunto de barra de control Encamine los dos cables a lo largo del conjunto de la • Manual del operador manija por el lado derecho.
  • Page 21 MONTAJE Y CONFIGURACIÓN Instalación Deslice el cable del interruptor de control de parada de emergencia a través de la abertura de la parte Presión de los neumáticos inferior derecha del panel de la manija, Verifique la presión de aire con un manómetro para neumáticos. Infle o desinfle los donde se pasaron previamente los neumáticos en forma uniforme entre 15 y 20 PSI.
  • Page 22: Controles Y Funcionamiento

    CONTROLES Y FUNCIONAMIENTO Control de Paro de Emergencia (SI ESTÁ EQUIPADO) El control de parada de emergencia es un interruptor utilizado para Manija de reversa detener el motor del timón y las funciones del timón desde la posición Control de Paro del operador en situaciones de emergencia.
  • Page 23 CONTROLES Y FUNCIONAMIENTO Deje que la cultivadora se mueva a su propio ritmo y no empuje hacia abajo las ADVERTENCIA barras de control para intentar forzar a los dientes a cavar con mayor profundidad, esto quita peso de las ruedas y reduce la tracción. LA GASOLINA ES SUMAMENTE INFLAMABLE Y SUS VAPORES PUEDEN EXPLOTAR.
  • Page 24 CONTROLES Y FUNCIONAMIENTO Ajuste de la altura • Para reducir el enmarañado de elementos en los dientes, ajuste el regulador de profundidad con un valor de profundidad suficiente para lograr una máxima acción de la manija de corte cuando los dientes “pican” los materiales contra el suelo. Asimismo, trate La manija debe ajustarse para que de realizar la labranza debajo de los residuos de cosecha o cultivos de cobertura cuando la cultivadora esté...
  • Page 25: Servicio

    SERVICIO Lubricación ADVERTENCIA Palanca del regulador de profundidad Después de 10 horas de Antes de realizar la inspección, la limpieza o el mantenimiento de la máquina, Herrajes de la funcionamiento, aceite o engrase barra de control apague el motor, espere hasta que detengan completamente todas las piezas los puntos de lubricación que móviles, desconecte el cable de la bujía y aléjelo de la bujía.
  • Page 26 SERVICIO Almacene la cultivadora en un área limpia y seca. Extraiga la tuerca de brida Lado V hacia afuera Extraiga la polea que sujeta la polea de Nunca almacene la cultivadora con combustible en el depósito en un área cerrada con correas transmisión, luego retire Tuerca con...
  • Page 27: Solución De Problemas

    SOLUCIÓN DE PROBLEMAS Problema Causa Solución Las ruedas y los dientes no giran 1. Uso incorrecto de los controles. 1. Revise la sección de Controles y Funcionamiento. 2. Correa(s) de transmisión desgastada(s), rota(s) o mal 2. Reemplace o ajuste las correas. ajustada(s).
  • Page 28: Piezas De Repuesto

    Clavija de clic, .25 x 1.56 Las piezas originales de Cub Cadet pueden ser ordenadas a través de su distribuidor local autorizado de Cub Cadet, en línea en cubcadet.com o por teléfono al 1-800-965-4Cub. Para localizar el distribuidor autorizado de Cub Cadet más cercano, visite cubcadet.com o llame al 1-877-282-8684.
  • Page 29: Garantía

    El marco en todos los productos Ultima ZT , y serie ZTX está cubierto para “Uso residencial” por una garantía de por vida limitada de siete años. Plataformas de corte: 1) Cub Cadet LLC garantiza las cubiertas de corte bajo la garantía del producto con el que vinieron, a menos que se indique lo contrario. 2) Cuando el producto esté...
  • Page 30 1-800-668-1238, o inicie sesión en nuestro sitio web en www.cubcadet.ca. Esta VINCULARÁ A CUB CADET LLC. DURANTE EL PERÍODO DE GARANTÍA, garantía limitada del producto está proporcionada por Cub Cadet LLC y es la única EL RECURSO EXCLUSIVO ES LA REPARACIÓN O LA SUSTITUCIÓN DE garantía provista por Cub Cadet LLC para el Producto.
  • Page 31 NOTES...
  • Page 32 NOTES...