The RT 75 tiller has a forward drive cable and a reverse drive cable. The forward drive cable is actuated by a bail
that the operator squeezes. The reverse drive cable is actuated by a lever. See Figure 3.1.
The shape of the drive bail and reverse lever will help prevent the operator from engaging the reverse lever while
in the forward mode. As the reverse lever is engaged, the bend on the bottom of it hits the drive bail making it neces-
sary to release the drive bail. See Figure 3.2.
CHAPTER 3: CABLES
reverse lever
forward drive bail
Figure 3.1
Reverse lever hitting
the drive bail
Figure 3.2
Cables
11