Cub Cadet RT 75 Shop Manual page 27

Remove nut
and bolt
Drag bar
Figure 5.6
handle mount nuts and bolts
screws
Figure 5.7
Remove these screws
Figure 5.8
9. Disconnect the front of the drag bar, using a 5/8"
wrench and a 1/2" wrench. See Figure 5.6.
10. Remove the four screws that hold the frame rails to
the transmission, using a 1/2" wrench.
See Figure 5.7.
11. Loosen, but dot remove, the handle mount nuts and
bolts.
12. Remove the two screws that hold the depth bar
bracket to the rear of the transmission, using a 1/2"
wrench. See Figure 5.8.
Transmission Removal
23