Chapter 5: Transmission Removal; Transmission Removal - Cub Cadet RT 75 Shop Manual

Transmission removal

Loosen screw and slide
cable off of the pulley
Figure 5.1
Unhook the cable
Figure 5.2

CHAPTER 5: TRANSMISSION REMOVAL

1. Remove the belts by following the procedures
described in Chapter 2: Belts.
2. Remove the engine by following the steps described
in Chapter 4: Engine Removal.
3. Loosen the forward drive cable pulley, using a 3/8"
wrench, and slide the cable off of the pulley.
See Figure 5.1.
4. Unhook the cable. See Figure 5.2.
Transmission Removal
21