ElliptiGO 8S Owner's Manual page 34

Adjusting the Derailleur System on the Arc Model
1. Place your bike on the kickstand.
2. Do a visual inspection of your shifter cable. Make sure
it is fully seated in the barrel adjusters on both the
shifter and the rear derailleur.
3. With the bike leaning on the kickstand so the rear
wheel is off the ground, turn the foot platform by hand
while shifting from eighth gear to first and back to
eighth.
4. Take note if the shifting hesitated while shifting in
either direction.
5. If the shifting was slow moving from eighth to first,
turn the barrel adjuster on the derailleur clockwise
one half turn and recheck the shifting.
6. If the shifting was slow moving from first to eighth gear,
turn the barrel adjuster on the derailleur counter-
clockwise one half turn and recheck the shifting.
7. Replace this sentence with: Repeat steps 3 - 6 until the
shifting is smooth in both directions.
2
3
5-6
Owner's Manual