ElliptiGO 8S Owner's Manual page 13

ElliptiGO® Arc Kickstand
The ElliptiGO Arc is equipped with a single-leg
kickstand. To operate the kickstand, follow these steps:
1. Retracting the Kickstand - To retract the
kickstand, stand on the side closest to the
kickstand. Grab the steering column with
one hand and lean the bike away from you
so that the kickstand no longer touches the
ground. Then sweep the kickstand backwards
with your foot, ensuring that it fully seats into
the riding position, approximately horizontal with
the ground.
2. Extending the Kickstand - To extend the
kickstand, stand on the side closest to the
kickstand. Grab the steering column with one
hand, lean the bike slightly away from you and kick
the kickstand down and forward.
ALERT! Do not stand on bike with the kickstand
extended. Standing on the bike with the kickstand
extended can cause a fall or damage your frame and
kickstand, voiding your warranty.
1
2
II
Owner's Manual