ElliptiGO 8S Owner's Manual page 18

6. Release the safety index pin and make fine
movements on the steering extender until
the pin aligns with the correct hole on the
steering extender and springs completely
back into place. Ensure that no red marks are
visible on the pin.
WARNING! THE SAFETY INDEX PIN
SHOULD BE FULLY SEATED SO THAT NO RED
MARKINGS ARE VISIBLE ONCE THE STEERING
HEIGHT IS SET. Failure to fully seat the
index pin could result in the steering column
collapsing during operation. This would likely
cause the rider to lose control and fall.
7. Secure the steering extender quick
release lever by grasping the steering
extender for leverage and using enough
force to leave an impression on your hand.
See the Quick Release Clamping
System section for details on closing quick
release levers.
WARNING! Securing the quick release
properly is critically important. Failure to do so
could result in the steering extender collapsing
or being removed unexpectedly while riding,
causing the rider to fall. Make sure to follow
the instructions set out in the Quick Release
Clamping Systems section when closing a quick
release lever.
6
NO! Do not
exceed MAX
EXTENSION
line!
7
Owner's Manual