ElliptiGO 8S Owner's Manual page 23

10. Slide the extender until the handlebars are at a desired riding
position. Ensure that the "MAX EXTENSION" line on the steering
extender is not visible above the base.
WARNING! ENSURE THAT THE "MAX EXTENSION" LINE ON THE
STEERING EXTENDER IS BELOW THE TOP OF THE BASE! Riding
while the "MAX EXTENSION" line is above the base could result in
the steering extender breaking during operation or being pulled out
of the base, causing a fall. Never use an ElliptiGO product with the
"MAX EXTENSION" line visible above the base.
11. Close the steering extender quick release lever firmly, using the
steering column for leverage. The force applied to closing the
lever should leave an imprint in your hand. See the section on
Quick Release Clamping Systems above for details.
WARNING! Securing the quick releases properly is critically
important. Failure to do so could result in the steering extender
collapsing or being removed unexpectedly while riding, causing
the rider to fall and be seriously injured. Make sure to follow the
instructions set out in the Quick Release Clamping Systems section
when closing a quick release lever.
WARNING! The steering column is one of the most important
safety features on ElliptiGO products. Before you ride, it is critical
that you ensure it has been secured properly in the riding position
and the quick release levers are fully closed with the appropriate
amount of tension. Failure to properly secure the steering column
into the riding position before riding can result in the unexpected
folding of the steering column and failure to secure a quick release
can result in the unexpected collapsing or removal of the steering
column extender, any of which will likely cause the rider to fall and
be seriously injured or killed.
10
11
Do not
exceed MAX
EXTENSION
line.
II
Owner's Manual