External Gate Status Indication Led - Centurion D10 User Manual

4.1.13. External Gate Status Indication
A LED (Light Emitting Diode)
mounted on your intercom allows
you to view the position of your gate
and the condition of the battery and
power supply from the safety of your
home. The different signals of the
LED are described below:
LED Signal
Off
On
Continuous slow flash
Continuous fast flash
One flash every two seconds
Two flashes every two seconds
Three flashes every two seconds
Four flashes every two seconds
If you choose not to fit a Gate Status Indicator, the Status LED on the Controller
can also be used for troubleshooting.
www.CentSys.com
Diagnosis
Gate is closed
Gate is partially or fully open
Gate is opening
Gate is closing
Courtesy (Pillar) lights on
No mains present
Battery voltage is low
Multiple collisions have occurred
page 29
FIGURE 28