Panasonic KX-TD1232AL User Manual Addendum page 71

4.2 DPT Features
Operator Call
Allows you to call an operator within the system. There can be up to two
extensions assigned as Operator 1 and 2.
If there is only one operator or if you do not specify the operator, you should generate the
General call. If you want to specify the operator, you should generate the Specific call by
pressing a pre-assigned operator call number.
General call
1
2
0
Specific call
1
2
operator call number
Conditions
• If you generate the General call for two operators, Operator 2 will receive your call if
Operator 1 is busy.
• If an operator is not assigned, this feature is not available; you will hear the reorder tone.
Programming References
• System Programming — Installation Manual & Installation Manual Addendum
[006] Operator / Manager Extension Assignment — Day / Night
[100] Flexible Numbering, Operator call, Operator 1 call, Operator 2 call
1. Lift the handset or press the SP-PHONE/MONITOR button.
2. Dial the feature number (0).
1. Lift the handset or press the SP-PHONE/MONITOR button.
2. Dial the operator call number for each operator.
O
DPT (72**)
20 30 35 50
71