Terminate Button - Panasonic KX-TD1232AL User Manual Addendum

2.2
4
AUTO DIAL
STORE
— To exit the Station Programming mode: Press [PROGRAM] or lift the handset.
Conditions
• The phantom extension number must be assigned in program [130] "Phantom Extension
Number Assignment" before assigning the Phantom button.
• A DSS button can be assigned as the Phantom button so that the operator can use it for
transferring a call.
• If you assigned the Phantom button to one of the CO buttons (13 through 24) on your KX-
T7230 telephone and change the telephone to a KX-T7235 model, you must re-program the
setting as the KX-T7235 telephone has only 12 CO buttons. If you do not change the
setting, the phantom extension call reaches the INTERCOM button.
Programming References
• System Programming — Installation Manual Addendum
[130] Phantom Extension
Terminate Button (Assignment)
Allows you to assign a Flexible (CO, DSS, PF) button as the Terminate button.
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
1
2
9
3
AUTO DIAL
STORE
— To exit the Station Programming mode: Press [PROGRAM] or lift the handset.
Programming
• To erase an incorrect entry, press the CLR (S2) button or the
TRANSFER (CLEAR) button.
(The TRANSFER button becomes the CLEAR button while in the programming
mode.)
4. Press the STORE button.
• The STORE indicator light turns on.
• The display shows the initial programming mode.
1. Press the desired Flexible (CO, DSS, PF) button which you wish to
assign as the Terminate button.
2. Dial 9.
• The display shows:
Terminate
3. Press the STORE button.
• The STORE indicator light turns on.
• The display shows the initial programming mode.
19