Panasonic KX-TD1232AL User Manual Addendum page 30

3.1
Making another selection within the same program address
• To make the next higher selection, press NEXT.
• To make the previous selection, press PREV.
• To make a specific selection, press SELECT and then enter the number.
Going to another program address
After pressing STORE, you can go to another program with either of the following two
methods:
(1) • To go to the next larger program address:
(2)
Going back to the operation mode
There are two ways to go back to the operation mode:
(1) Lift the handset while in programming mode.
(2) When the Initial Message: USR-PRG NO?-> is displayed, press the PROGRAM
30
Programming Instructions
Press Soft 1 (SKP+) or VOLUME
• To go to the next smaller program address:
Press SHIFT + Soft 1 (SKP-) or VOLUME
To go to a specific program address:
Press END, then enter the program address.
button.
(To display the Initial Message, press END.)
(DOWN).
(UP).