System Speed Dialing Name Set - Panasonic KX-TD1232AL User Manual Addendum

3.2 User Programming (Manager Programming)
Description
Selection
Default
Programming
Conditions
Feature References

System Speed Dialing Name Set

Assigns names to the system speed dial numbers assigned in program [001]
"System Speed Dialing Number Set." The KX-T7235 shows the stored name
when performing System Speed Dialing. The stored names are applied to the
CO Incoming Call Information Display / Log features.
• Speed dial number: 000 through 499
• Name: 10 characters (max.)
All speed dial numbers – Not stored
1. Enter 002.
Display: SPD Name Set
2. Press NEXT.
Display: SPD Code?->
3. Enter a speed dial number.
To enter speed dial number 000, you can also press NEXT.
Display example: 000: Not Stored
4. Enter a name.
For entering characters, see Section 2.2 "Programming."
To delete the current entry, press CLEAR.
To change the current entry, press CLEAR and the new name.
5. Press STORE.
6. To program another speed dial number, press NEXT or PREV, or
SELECT and the desired speed dial number.
7. Repeat steps 4 through 6.
8. Press END.
• Speed dial numbers are programmed in program [001] "System Speed
Dialing Number Set."
• There is a maximum of 500 names. Each name has a maximum of 10
characters.
Installation Manual, Section 3, Features,
CO Incoming Call Information Display
CO Incoming Call Information Log
Special Features for KX-T7235 — System Speed Dialing
System Speed Dialing
002
35