4.3
Programming References
• Station Programming (Section 2)
Flexible Button Assignment — Alert Button
(System Programming — [005] (Installation Manual) can be used for this assignment.)
Feature References
Hotel Application — Timed Reminder, Remote (Wake-Up Call)
Timed Reminder, Remote (Wake-Up Call)
The operator can remotely set or cancel the Timed Reminder of the desired
extension.
Display Operation (— KX-T7235 only)
Setting
1
Hotel
2
Check in
Check out
F3
Wake up
3
or
extension number
4
Wake up Room:
S 1
S 2
5
hour and minute
6
0
or
7
0
or
8
Wake up Room:
Time(hh:mm): 07:00
AM/PM(0/1):
Daily Y/N(1/0): 0
END
CLR
S 1
S 2
92
Operator Service Features
1. Press the Hotel (F10) button.
F10
2. Press the Wake up (F3) button.
3. Dial the extension number or press the desired DSS button to set
the wake-up reminder.
• If you want to exit, press the END (S1) button.
4. Press the NEXT (S3) button.
• If the wake-up reminder is already set, the current time is
2345
NEXT
5. Enter the hour (01 through 12) and minute (00 through 59).
S 3
6. Dial 0 to enter AM, or 1 to enter PM.
7. Dial 0 for one time alarm setting,*
setting.*
1
• You hear a confirmation tone.
*
1
1
*
2
2345
8. Press the PROG (S3) button.
PROG
S 3
displayed. If not, the time is blank.
2
You hear an alarm ringing at the preset time and then the setting is cleared.
You hear an alarm ringing at the preset time every day until the setting is
changed or cancelled.
DPT (72**)
20
<Operator only>
1
or dial 1 for a daily alarm
30
35 50