Programming Instructions; General Programming Instructions; Default Setting - Panasonic KX-TD1232AL User Manual Addendum

3.1

General Programming Instructions

User Programming (Manager Programming) allows you, the proprietary telephone (PT) user,
to program the following features of the system from your telephone individually.
• Date and Time Set
• System Speed Dialing Number Set
• System Speed Dialing Name Set
• Extension Number Set
• Extension Name Set
• Flexible CO Button Assignment
• Operator / Manager Extension Assignment – Day / Night
• DSS Console Port and Paired Telephone Assignment
• Absent Messages
• Quick Dial Number Set
• Budget Management
• Charge Margin and Tax Rate
• ISDN Extension Number Set
• ISDN Extension Name Set
• Budget Management on ISDN Port
• Charge Rate Fractional Point Assignment
• Charge Rate Assignment
• TD286 Extension Number Set
• TD286 Extension Name Set
• Budget Management on TD286 Port
To program, you need to switch your telephone to the User Programming mode. During the
programming mode, your telephone is put in a busy condition to outside caller. If you want to
make a normal call handling operation, you should finish the programming mode.

Default Setting

This system has a default factory setting. Any required changes can be written on
"Programming Tables."
Required Telephone Set
One of the following telephone sets is required for User Programming (Manager
Programming):
• Proprietary Telephone (PT): KX-T7235, KX-T7230
Soft Buttons and SHIFT Button on the Display PT
Three soft buttons are provided just below the display on the display Proprietary Telephones
(PT). The functions of these soft buttons vary as the programming procedures advance from
step to step. Those functions that are currently assigned to the buttons are shown on the lower
line of the display. If the SHIFT button indicator is on, two functions are available with each
soft button. To alternate between the two functions, press the SHIFT button on the right side
of the display.
26

Programming Instructions