Panasonic KX-TD1232AL User Manual Addendum page 36

003
Description
Selection
Default
Programming
Conditions
36
3.2 User Programming (Manager Programming)
Extension Number Set
Assigns an extension number to each extension.
• Jack number: 01 through 64 (-1 / -2)
• Extension Number: 2 through 4 digits
Jack 01-1 through 64-1 = 201 through 264;
Jack 01-2 through 64-2 = 301 through 364
1. Enter 003.
Display: EXT Number Set
2. Press NEXT.
Display: Jack NO?->
3. Enter a jack number.
To enter jack number 01, you can also press NEXT.
To select the second part (-2), press NEXT after entering a jack number.
Display: #01-1:EXT201
4. Enter an extension number.
To change the current entry, press CLEAR and the new number.
5. Press STORE.
6. To program another jack, press NEXT or PREV, or SELECT and the
desired jack number.
7. Repeat steps 4 through 6.
8. Press END.
• There is a maximum of 128 extension numbers for KX-TD1232. Each
extension number can be two, three, or four digits, consisting of 0 through
9. The and # keys cannot be used.
• Jack numbers 01 through 32 are for the Master System and 33 through 64
are for the Slave, if available.
• An extension number is invalid if the leading first or second digits disagree
with the setting of the program [100] "Flexible Numbering, 1st through 16th
hundred extension blocks." If one digit is assigned as the leading digit,
some extensions have two digits and some have three digits. If two digits
are assigned, some have three digits and some have four digits.
(-1 = first part, -2 = second part)