Ghs Blower Drive Belt - Model Mc, Md, Mt, Mtl - Walker MT Detailed Instructions

GHS Blower Drive Belt - Model MC, MD, MT, MTL

1. Remove the GHS blower drive belt tension by de-
pressing the idler pulley on the tightener arm. Roll
the belt off the blower pulley. The belt should be
clear of the blower pulley, allowing free movement
of the blower wheel.
2. Reverse the procedure to install the GHS blow-
er drive belt and spring.
SERVICE INSTRUCTIONS
July 2006
Blower Drive
Pulley
GHS Blower
Drive Belt
GHS Blower Drive Belt Assembly (Disengaged)
Blower Drive Belt Spring Removal
Idler Pulley
(Engaged)
GHS Blower Drive Belt Assembly (Engaged)
WALKER MANUFACTURING COMPANY
Page: 4-18
Blower
Pulley
Belt Tightener
Idler Pulley
(Disengaged)