Maintenance Instructions
GHS Blower Drive Belt
1.
Remove the GHS blower drive belt by unhook-
ing the belt tension spring from the hook on the
chassis frame (located above the blower pul-
ley). Lift the belt tightener idler pulley up and roll
belt off the pulleys.
2.
Reverse the procedure to install the GHS blow-
er drive belt and spring.
Blower Drive
Pulley
GHS Blower
Drive Belt
Belt Tightener
Idler Pulley
(Disengaged)
GHS Blower Drive Belt Assembly (Disengaged)
Blower Drive Belt Spring Removal
Idler Pulley
(Engaged)
GHS Blower Drive Belt Assembly (Engaged)
REPLACING/REPAIRING
Blower
Chassis
Pulley
Frame Hook
Removed
Spring
Attached
Spring
67