Electrical System - Model Mt, Mtl, Mtefi; Circuit Breakers - Walker MT Detailed Instructions

ELECTRICAL SYSTEM - MODEL MT, MTL, MTEFI

For troubleshooting, refer to Wiring Diagram.
IMPORTANT: For Model MTEFI, an illuminated En-
gine Service Light on the control panel means that a
fault has been detected in the electrical/fuel system.
Contact an authorized Kohler Service Dealer to diag-
nose the fault.
IMPORTANT: Disconnect both battery cables before
unplugging any wiring connectors or making repairs on
the electrical system.
IMPORTANT: Disconnect the battery cables before
unplugging and removing the instrument panel.
Location
Master Circuit Breaker Mounted on
Bracket Behind Battery
Radiator Fan Circuit Breaker Mounted
Adjacent to Master Circuit Breaker
Instrument Panel
Instrument Panel
SERVICE INSTRUCTIONS
July 2006

Circuit Breakers

A master circuit breaker is mounted on a bracket be-
hind the battery. The circuit breaker may have either
the manual or automatic reset function -- both types
have been used. See Circuit Breaker Location photo.
Circuit Breaker
Reset Amperage
30 AMP
30 AMP
7 AMP
10 AMP
WALKER MANUFACTURING COMPANY
Page: 5-2
Circuit Breaker
Mounting Bracket
30 Amp
Circuit Breaker Location
Circuits (Electrical Load)
- Instrument Panel (MT, MTL, MTEFI)
- Headlights (MT, MTEFI)
- Starter Solenoid (MT, MTL, MTEFI)
- ECU (MTEFI)
- Fan Control Module (MTL)
®
- Powerfil (MT, MTL, MTEFI)
- Safety Circuits (MT, MTL, MTEFI)
- Warning Lights/Horn (MTL)
- Headlights (MTL)