Ghs Blower Drive Belt - Walker T25i Operator's Manual

Maintenance Instructions

GHS Blower Drive Belt

1. Remove the GHS blower drive belt tension by
depressing the idler pulley on the tightener arm.
Roll the belt off the blower pulley. The belt
should be clear of the blower pulley, allowing
free movement of the blower wheel.
2. Reverse the procedure to install the GHS blower
drive belt.
74
Blower Drive
Pulley
Depress Idler Pulley
Down to Relax Belt
GHS Blower Drive Belt Assembly (Disengaged)
Belt Tightener
Idler Pulley
(Engaged)
GHS Blower Drive Belt Assembly (Engaged)
REPLACING/REPAIRING
GHS Blower
Drive Belt
Blower
Pulley
Belt Tightener
Idler Pulley
(Disengaged)