Debris Blower Rotation Pinions; Debris Blower Rotation Handle - Walker MT Detailed Instructions

Debris Blower Rotation Pinions

The two (2) rotation pinions should slightly contact each
other without any resistance.
1. Loosen the set screw of each stop ring on the ro-
tation handle.
2. Keeping the two (2) pinions slightly in contact with
each other, position the upper stop ring against the
lower support and tighten the screw.
3. Position the lower stop ring close to the lower sup-
port and tighten the set screw. The rotation handle
should rotate freely without excessive end play.
SERVICE INSTRUCTIONS
July 2006

Debris Blower Rotation Handle

With the rotation pinions properly adjusted, the two (2)
stop rings should be positioned close enough to the
lower support to allow the rotation handle to rotate free-
ly without excessive end play.
Support
& Set Screw
WALKER MANUFACTURING COMPANY
Page: 4-77
Rotation
Handle
& Set Screw
Lower
Lower
Stop Ring
Rotation
Pinions
Debris Blower Rotation Pinions
& Handle Adjustment
Upper
Stop Ring