Engine/PTO Belt - Model MB
1.
To remove the engine/PTO belts:
a.
Remove belt guard from underneath muffler.
Refer to Remove Belt Guard photo.
b.
Relax the belt by depressing the spring-
loaded idler arm.
c.
Roll the belts off the pulley one at a time and
remove the belts.
2.
Reverse the removal procedure to replace the
engine belt.
SERVICE INSTRUCTIONS
Idler Arm
Idler Pulley
PTO Drive
Pulley
Engine/PTO Belt (Disengaged)
Idler Arm
Idler Pulley
PTO Drive
Pulley
Engine/PTO Belt (Engaged)
WALKER MANUFACTURING COMPANY
Page: 4-14
July 2006
Remove Bolts to Access
Remove Belt Guard
Electric
Clutch
Idler
Pulley
Push Idler Pulley
to Relax Belt
Engine/PTO
Belts
Electric
Idler
Clutch
Pulley
Engine/PTO
Belts
Engine/PTO Belt
Tension
Spring
Tension
Spring