B - Block User; U - Unblock User - AT&T DEFINITY Remote Port Security Device User Manual

B - Block User

Syntax:
[
b <user_id>
RETURN
Blocks an RPSD Key user from access to the RMATS channel. Both permanent and
non-permanent users may be blocked. In the syntax line above,
is the user ID. To determine whether a user is already blocked, or to check the
<user_id>
user IDs, use the List User Table command. See List User Table in this section.
Sample Command and Response:
> b KEY20
JPLock01 445 08/12/90 13:14:22 KEY20 -- User Blocked OK --
>

U - Unblock User

Syntax:
[
u <user_id>
RETURN
Removes the block placed on an RPSD Key user's access to the RPSD Lock. Both permanent
and non-permanent users may be unblocked. In the syntax line above,
is the user ID. To determine whether a user is blocked, or to check the user IDs, use
<user_id>
the List User Table command. See List User Table in this section.
Sample Command and Response:
> u KEY20
JPLock01 446 08/12/90 13:19:22 KEY20 -- User Unblocked OK --
>
]
]
is the command and
b
is the command and
u
RPSD System Administrator Command Set
3-9