B-2 Rpsd Key Leds - AT&T DEFINITY Remote Port Security Device User Manual

Table B-1 explains the status of the RPSD Lock when the different LEDs are lit.
1 2 3
On On Off
On Off On
On Off Off
On Off
Off
On Off
Off
On Off
Off
RPSD Key
AT&T
O
POWER
The first LED on the left is the red Power light. This indicates that the power is on. This LED
should remain lit whenever the RPSD Lock is plugged into an electrical outlet.
When first powered up, the LEDs should all blink on and off in unison three times, then settle
into a Locked condition.
B-2 Device LEDs
TABLE B-1
RPSD Lock LEDs
LED
5 6
4
Off
Off
Off
Off
Off
Off
Off
Off
On
On Off
Off
Off
Off
On
Off Off
Off
DEFINITY RPSD
O O O
RING CALL
IN OUT
FIGURE B-2
RPSD Key LEDs
Meaning
7
An incoming call is being processed.
Off
The RPSD Lock is ringing the modem.
Off
An outgoing call is in progress from
Off
the modem.
The Lock is idle and in a ready
Off
condition, able to
accept incoming calls
or process outgoing calls.
An incoming call is being authenticated
Off
for permission to
access the RPSD
Lock.
On
An incoming call has been
authenticated, passed to the PBX,
and is in progress.
O O O
VERIFY CONNECTED
IDLE
KEY