Ls - List Statistics - AT&T DEFINITY Remote Port Security Device User Manual

LS - List Statistics

Syntax:
ls [ ]
RETURN
The List Statistics command displays a statistical summary of call attempts and failures, both
cumulative and since the last time the statistical summary was reset. The summary is reset by the
administrator using the Reset Statistics command, described in this section.
Sample Command and Response:
> ls
---RPSD/Lock Access Attempt Statistics - Last Reset: 08/14/90
Successful Authentications
Failed Attempts by Reason
(1) No RPSD/Key Detected
(2) No Response
(3) Invalid User ID
(4) Blocked User
(5) Invalid Response
(6) Outgoing Call
(7) Ring - No Answer
(8) Force Disconnect
(9) Restricted Time
The fields of the List Statistics screen are:
Last Reset
Successful
Authentications
Failed Attempts
by Reason
Since Last Reset
Gives the date that the statistics kept in the Since Last Reset field were
reset to 0. Cumulative statistics are never reset to 0.
Provides the number of times that a caller was successfully authenticated
by the Lock since the last time the statistics were reset and also
cumulatively since the Lock was installed.
Provides the number of times that a caller failed in an access attempt for
each of the nine failure reasons. The statistics are broken down into the
number of failures since the last reset and also the cumulative total since
the Lock was installed. For a more detailed explanation of the causes of
failure, see Table 3-1.
Cumulative
142
19
1
1
0
0
0
0
2
1
1
1
14
3
1
1
3
2
1
2
RPSD System Administrator Command Set
3-23