Rs - Reset Statistics; Fc - Force Connect - AT&T DEFINITY Remote Port Security Device User Manual

RS - Reset Statistics

Syntax:
rs [ ]
RETURN
Entering r
resets the access attempts statistics to zero. This command does not reset
S
cumulative totals. The access attempts statistics are obtained by using the List Statistics
command.

FC - Force Connect

Syntax:
[ ]
fc RETURN
If a call comes in that the administrator wants to go through regardless of whether the caller has a
Key, the system administrator can issue the Force Connect command while the Lock is in Verify
mode and force the connection to be made. There is a window of about sixty seconds in Verify
mode during which the Force Connect command may be issued.
The Lock will request confirmation of a Force Connect command.
If the command is issued when there is no call coming in, an error message will be returned.
Sample Command and Response:
JPLock01 193 08/17/90 13:43:55 Call Received
> fc
Force Connect Current Call (Y/N) ? y
JPLock01 194 08/17/90 13:44:16 <Forc-Con> Connected
WARNING:
Use of the FC command provides a call with connection to the protected
resource, bypassing the security normally provided by the RPSD Lock. Use only
to connect an authorized caller directly to the host resource.
3-24
RPSD System Administration