Installers Information - Specifications - Rinnai Royale FS35 ETR Operation & Installation Manual

INSTALLERS INFORMATION - SPECIFICATIONS

Issue 3
Model:
Description:
Gas input rate:
Gas Control:
Gas Connection:
Test Point Pressure:
Flue terminal:
Flue:
Fan:
Combustion system:
Logs:
Ignition system:
Operation:
Safety Devices:
Power Supply:
Combustion method:
Rating Plate location:
Weight:
Installation type:
The manufacturer reserves the right to change or modify specifications without notice.
Royale - Freestanding ETR
Freestanding Royale Flame Fire ETR FS35ETR
Rinnai Freestanding Radiant/Convector, glass fronted, ceramic log
space heater with forced convection and natural draft flue system.
Pilot and 'Low':
High:
Solenoid Electronic Control
1/2" BSPF male flare to barrel union
100 mm dia. top discharge
An approved Rinnai Flue kit is mandatory for this appliance, and it
is to be installed in acccordance with AS/NZS 5601.
Use FLFKIT05 / FLFTWKIT minimum of 3 metres of flue to be
installed.
Rinnai appliance warranty conditions will be voided if non Rinnai
flue components are fitted. Rinnai appliances are NOT
CERTIFIED for use with non Rinnai flueing components.
Tangential 2 speed, power rating 90 Watts
Multi port burner
Ceramic
Automatic electronic ignition
Touch pad control.
Thermostatically controlled to light pilot and burners.
Able to select the following features:
- Timer
- Auto Off function
- Flame function
- Child lock
Flame failure thermocouple
Overheat via. Thermistor
Fan delay via. PCB
240V 50 Hz. Unit is supplied with 3 pin plug and supply lead.
Naturally aspirated burner
Right hand side bottom edge
64 Kgs.
Freestanding with Timer Remote unit
- 14 -
Natural Gas Propane
8 MJ/hr 8 MJ/hr
35 MJ/hr 35 MJ/hr
0.93 kPa 2.35 kPa
Issue 3 - ©Rinnai