En Safety - Programming Mode - Stiga Autoclip 720S User Manual

CHANGE PASSWORD: function for setting or changing the password.
- No: the password does not need to be changed.
- Yes : for entering or changing the password which will be used to start the robot and disable
the alarm. You will prompted to enter the following information :
• Password : Enter the old password (manufacturer's default 0000)
• New password : Enter the new password.
• Repeat password : Enter the new password again.
EN
To set or change the password, it is fi rst necessary to enter the previous one and
then enter your new one. Upon purchase, the password entered by the manufacturer
consists of four numbers (0000).
When entering the password, you will be prompted to re-enter the password in
order to ensure that it has been set correctly. In order to not forget the password,
choose a number combination that is easy to remember.
START PASSWORD: This function allows defi ning whether you want to enter a password
each time the robot is turned on after a period of inactivity (e.g. storing away for winter).
- No: There is no need to enter a password each time the robot is turned on. The password
will only be required to disable the alarm. The robot requires the password to confi rm
this parameter.
- Yes: The password will be required each time the robot is started.
User's manual
SAFETY – PROGRAMMING MODE
38