Adjustment Of The Rain Sensor - Stiga Autoclip 720S User Manual

6. Lower the hood and fasten the knobs (A).
7. Stop the robot in safe conditions (see
"Robot Safety Stop").
8. Adjust the distance between the pins (A-B)
by turning the eccentric pin (A).
The sensitivity of the sensor increases as
the distance between the pins decreases.
Do not bring the pins too close to each
other.
If the sensor detects rain, the robot operates
according to what is set in the program (see
"Programming Mode").

ADJUSTMENT OF THE RAIN SENSOR

29
knobs (A)
pin (B) eccentric pin (A)
User's manual
EN