Border Cut; Eco Mode; Rain Sensor (Depending On The Model); App Lock - Stiga G 300 Instruction Manual

• The frequency at which the work point is reached expressed as a % of the total working time
scheduled weekly.

4.7.11. BORDER CUT

The "Border cut" section allows to program the border cutting of the garden on a certain day.
1. Choose the days in which to perform the border cut.
2. Press the dedicated button to enable the function.
NOTE: The border cut can be activated only for the days of the week in which the robot lawn
mower has been scheduled to work.

4.7.12. ECO MODE

NOTE: Check the availability of this function on the STIGA.GO App.
The 'Eco mode' function allows the user to set a low-energy mode by proportionally reducing the working
time of the robot lawn mower compared to the time programmed by the user.
NOTE: It is advisable to use this function at times of the year when the grass grows more slowly.
4.7.13. RAIN SENSOR (DEPENDING ON THE MODEL)
The "Rain sensor" function allows to enable or disable the rain sensor on the robot lawn mower.
The rain sensor can be set to three different sensitivity levels. A higher sensitivity corresponds to a
prolonged permanence in the base in case of rain.
Low sensitivity: 4 hours.
Medium sensitivity: 8 hours.
High sensitivity: 12 hours.
1. Press the dedicated button to enable the function.
2. Select one of the three available rain sensor sensitivity levels.

4.7.14. APP LOCK

In order to prevent the robot lawn mower from being used by children or unauthorised persons, the keypad
can be locked. This will allow the robot lawn mower to be controlled solely via the App.
Procedure:
1. Activate or deactivate the Keypad/App Lock function from the app's 'settings' menu.
NOTE: When the function is active, the keypad lock remains active even if the robot lawn mower
is switched off.
36
4. INSTALLATION
EN