Identifi Cation Of Manufacturer And Appliance; Requesting Technical Assistance - Stiga Autoclip 720S User Manual

The data plate shown is applied directly
onto the appliance. It contains references
to information which is essential for safely
operating the robot.
A–Manufacturer Identifi cation.
B–EC conformity label.
C–Model / Serial number / Manufacturing
year.
D–Technical specifi cations.
EN
For any technical requirements, please contact the Manufacturer's Technical Service Centre or
an authorised centre. For technical assistance, indicate the data reported on the data plate, the
approximate operating hours and the type of fault detected.
User's manual
IDENTIFICATION OF MANUFACTURER AND EQUIPMENT

REQUESTING TECHNICAL ASSISTANCE

DATA PLATE
(A) Identification of manufactur
(B) EC conformity label
(C) Model
(D) Technical
specifications
(C) Serial number (C) Manufacturing year
6