Settings - Programming Mode - Stiga Autoclip 720S User Manual

ALARM: function for enabling or disabling the antitheft
alarm. The password is required to disable the alarm
(Default 0000).
• Disable: Disables or turns off the alarm if it is on. A
continuous and downward sound signals the disabling
of the alarm.
• Enable: Turns the alarm on. If the robot is lifted by
its handle the alarm beeps. A triple beep signals the
enabling of the alarm.
RAIN SENSOR: Function for setting the robot in case of rain.
EN
• Restart: in case of rain, the robot returns to the station
and remains in "charging" mode. At the end of the
charging cycle, the robot only starts mowing again if it
has stopped raining.
• Disabled: in case of rain, the robot continues to mow.
• Pause: in case of rain, the robot returns to the station
and remains there (in "charging" mode) until the "Pause"
key is pressed.
AUTO SETUP: (only for some versions, see "Technical
Specifi cations"), function for automatically reducing the
robot's mowing time based on the conditions of the lawn.
• Enable: The robot reduces the working time based on
the conditions of the grass. When the lawn surface is
mowed, the machine automatically sets a rest period
which delays subsequent departures from the charging
station. However, the robot will operate within the set
working times.
• Disable: The robot will work according to the set time
and until the batteries run out.
User's manual
"SETTINGS" – PROGRAMMING MODE
34
ALARM: