Dismantling Your Workstation; Packing Your Equipment; Reinstalling Your Workstation - DEC DECstation 5000 Model 100 Series Hardware Operator's Manual

Dismantling Your Workstation

Follow the procedures for turning off your workstation
1.
described on page 9-9 of this guide.
Unplug all power cords from their power sources.
2.
Disconnect all external devices and expansion boxes from
3.
the system unit and from each other.
Disconnect the monitor, the mouse or tablet, and the
4.
keyboard from the system unit.
Disconnect the keyboard and the mouse or tablet from the
5.
connector block on the keyboard-mouse cable.
If you are on a network, disconnect your Ethernet cable
6.
from the connector on the system unit.

Packing Your Equipment

Pack each piece of equipment in the carton in which it came.
Use the padding that came in the carton to hold the equipment
securely in place.
Be sure to include the following in each carton:
Cables, power cords, and terminators that came with each
component
Manuals and other documentation for each component
Caution:
components in the system unit if you do not fasten it securely.

Reinstalling Your Workstation

To reinstall your workstation, follow the instructions in the
DECstation 5000 Model 100 Series Hardware Installation
Guide.
4–2 Moving the Workstation
The end of the SCSI cable is heavy. It can damage the