Cnfg; Display Of General Configuration Information; Display Of Slot Configuration Information - DEC DECstation 5000 Model 100 Series Hardware Operator's Manual

cnfg

>>cnfg [ # ]
The cnfg command displays important information about the
configuration of your workstation. The information tells you
what kind of hardware is in the workstation and connected to
the workstation. If you type a slot number for [#], the command
displays configuration information for that slot. Otherwise,
it displays general information for all the slots. Here is an
example of the general information:
>>cnfg
3: KN02-BA DEC
0: PMAG-AA DEC
1: PMAD-AA DEC
Figure 11-1. Display of general configuration information
This information shows what kind of modules are in the base
system slot (base slot 3) and the option slots. The workstation
has option modules in slots 0 and 1, but not in slot 2.
Here is an example of information for just one slot: in this case,
for base slot 3, the base system slot:
>>cnfg 3
3: KN02-BA DEC
---------------------------------------------------
DEV
===== ================== ========= ====== ========
rz0
rz1
tz2
dcache ( 64 KB), icache ( 64 KB)
mem( 0):
mem( 1):
mem( 2):
mem( 3):
mem( 4):
mem( 5):
Figure 11-2. Display of slot configuration information
V5.7e TCF0
V5.3d TCF0
V5.3d TCF0
V5.7e TCF0
PID
RZ55 (C) DEC
RRD40 (C) DEC
a0000000:a03fffff
a0400000:a07fffff
a0800000:a0bfffff
a0c00000:a0ffffff
a1000000:a13fffff
a1400000:a17fffff
( 24 MB)
(enet: 08-00-2b-0f-45-72)
(SCSI = 7)
(CX -- D=8)
(enet: 08-00-2b-0f-45-31)
( 24 MB)
(enet: 08-00-2b-0f-45-72)
(SCSI = 7)
VID REV
DEC 0700
DEC 0700
( 4 MB)
( 4 MB)
( 4 MB)
( 4 MB)
( 4 MB)
( 4 MB)
Using the Console Commands 11–11
SCSI DEV
DIR
CD-ROM
SEQ