DEC DECstation 5000 Model 100 Series Hardware Operator's Manual page 182

Notice that the display begins with the same general
information as in Figure 11-1, on page 11-11. The rest of the
display shows information regarding the devices and memory
that are installed in the base slot (three devices and six memory
modules).
Here is an explanation of the information in both displays. The
numbers in black circles refer to the text that follows.
3: KN02-BA DEC
---------------------------------------------------
DEV
===== ================== ========= ====== ========
rz2
rz4
tz1
dcache
mem( 0):
mem( 1):
mem( 2):
mem( 3):
mem( 4):
mem( 5):
Slot number.
Model code of the hardware item. For example,
the model code of the system module.
Module code. This code shows what kind of module is
installed in the slot. Table 11-2, on page 11-14, explains the
codes. The system module slot, base slot 3, always contains
three modules: memory (
(
SCSI
The module code for memory shows the total amount of
memory installed in the workstation. The
of the SCSI controller for the slot.
Device code with SCSI ID number of the device. For
example, in the code rz4, 4 is the SCSI ID number.
Product ID. Some devices show a product ID in this column,
but others do not.
11–12 Using the Console Commands
V5.7e
PID
RZ55 (C) DEC
RX23 (C) DEC
( 64 KB), icache ( 64 KB)
a0000000:a03fffff
a0400000:a07fffff
a0800000:a0bfffff
a0c00000:a0ffffff
a1000000:a13fffff
a1400000:a17fffff
).
TCF0 ( 24 MB)
(enet: 08-00-2b-0f-45-72)
(SCSI = 7)
VID
DEC
DEC
( 4 MB)
( 4 MB)
( 4 MB)
( 4 MB)
( 4 MB)
( 4 MB)
), Ethernet (
MB
REV SCSI DEV
0700 DIR
0700 DIR
SEQ
is
KN02-BA
), and SCSI
enet
is the SCSI ID
7