Setting The Timer Program - DeDietrich NeOvo EcoNox EFU 22 User Manual

Fig.45 Accessing Manual Forcing
Fig.46 Setting the set point
Fig.47 Accessing the Hour Run Meters /
Timer Program / Clock menus
Fig.48 Selecting the circuit
7615193 - v01 - 09072015
2. Access Manual Forcing by pressing the
pressing the
Note
Manual Forcing is available only when the
MW-5000010-2
3. Set the value of the heating water temperature set point by pressing
4. Go back to the main display by pressing the
For more information, see
Browsing in the menus, page 19
MW-5000042-3

8.2.5 Setting the timer program

Note
The name of the PCB is displayed. Check that it is actually the
PCB on which the setting must be made.
1. Access the Hour Run Meters / Timer Program / Clock menus.
2. Select the Timer Program sub-menu by pressing the
Confirm by pressing the
MW-5000044-2
3. Select the circuit by pressing the
the
Note
At least two circuits are available:
The icons dedicated to the days of the week all flash at the same
time:
MW-5000139-1
key.
or key. Confirm by pressing the
key.
Heating
Domestic hot water: DHW
8 Control panel settings IniControl 2
or key. Confirm by
icon flashes.
key.
key.

key.
or key. Confirm by pressing
EFU
or key.
33