Shutdown; Switching Off The Heating - DeDietrich NeOvo EcoNox EFU 22 User Manual

6 Utilisation with the control panel IniControl 2
6.3

Shutdown

Fig.29 Selecting the shut-down mode
MW-5000027-2
Fig.30 Confirming the heating mode
Fig.31 Confirmation of heating shut-down
22 EFU
4. Open the oil inlet valve.
5. Switch on the boiler.
6. A venting cycle is run automatically.
7. The display shows the operating status of the boiler, the heating flow
temperature and any error codes.

6.3.1 Switching off the heating

Note
The name of the PCB is displayed. Check that it is actually the
PCB on which the setting must be made.
1. Select the shut-down mode by pressing the
2. Select heating mode by pressing the
MW-5000133-1
3. Select the heating shut-down pressing the
ing the
Note
If you press the
played).
The frost protection function continues to run.
The heating has been shut down.
4. Go back to the main display by pressing the
Note
The display disappears after a few seconds' inactivity.
MW-5000134-1
key.
key. The screen displays OFF
key, the appliance starts up again (ON is dis­
key twice.
key. Confirm by pressing the
key. Confirm by press­
key.

7615193 - v01 - 09072015