Technical Specifications; Homologations; Certifications; Directives - DeDietrich NeOvo EcoNox EFU 22 User Manual

3

Technical specifications

3.1

Homologations

Tab.2

Oil categories

Type of oil that can be used
Standard fuel oil
Low-sulphur oil
Bio-oil B10
Mixture of low-sulphur oil (<50 mg/kg) plus 5.9 to 10.9% (in volume) of FAME
Bio-oil B5 (or Bio 5)
Mixture of low-sulphur oil (<50 mg/kg) plus 3 to 5.9% (in volume) of FAME
(1) Liquid petroleum products — Fatty Acid Methyl Esters used as heating fuel
7615193 - v01 - 09072015

3.1.1 Certifications

Tab.1 Certifications
CE identification number
Type of connection

3.1.2 Directives

This product complies with the requirements of the following European Di­
rectives and Standards:
Pressure Equipment Directive 97/23/EC, Article 3, paragraph 3
European New Approach Directive DI 98/70/EC 13/10/1998: Directive
on the quality of petrol and diesel fuels
Efficiency Directive 92/42/EC
Electromagnetic Compatibility Directive 2004/108/EC
Generic standards: EN 61000-6-3, EN 61000-6-1
Standard referred to: EN 55014
Low Voltage Directive 2006/95/EC
Generic standard: EN 60335–1
Standard referred to: EN 60335–2–102
DIN 51603–1: Oil 5 < S < 2000 ppm
EN 590: GONR
DIN 51603-6: Bio-oil (10% FAME)
EN 303–1 - EN 303-2 - EN 304
This product conforms to the requirements of European Directive
2009/125/EC on the ecodesign of energy-related products.
Apart from the legal provisions and Directives, the additional Directives de­
scribed in these instructions must also be observed.
For all provisions and Directives referred to in these instructions, it is
agreed that all addenda or subsequent provisions will apply at the time of
installation.
3.1.3 Oil categories
(1)
(1)
3 Technical specifications
0085CQ0004
B
23
Maximum viscosity
2
6 mm /s at 20 °C
2
6 mm /s at 20 °C
2
6 mm /s at 20 °C
2
6 mm /s at 20 °C
EFU 9