6 Utilisation with the control panel IniControl 2
Fig.21
Confirming the menu or parameter
MW-5000019-3
Fig.22
Modifying a value
Fig.23
Confirming a new value
MW-5000019-3
Fig.24
Back to the main display
20
EFU
4. To confirm selection of the desired menu, sub-menu or parameter,
press the
Note
If no keys are pressed for 3 minutes, the appliance returns to nor
mal operating mode.
The display disappears after a few seconds' inactivity.
5. To modify the value of a parameter, press the
desired value is displayed.
MW-5000025-3
6. To confirm a new parameter value, press the
7. To go back to the main display, press the
MW-5000016-3
6.1.2 Accessing the User menu
The information and settings in the User menu can be accessed by every
one.
Note
The name of the PCB is displayed. Check that it is actually the
PCB on which the setting must be made.
key.
or
key until the
key.
key.
7615193 - v01 - 09072015